Matek Systems F405 F405-WING Drone Flight Controller

Free Shipping (Est. 10-15 Business Days)

Please allow an additional 10 business days for delivery.
Factors such as delayed logistics and customs clearance may have an impact on the delivery time.


MCU: 168MHz STM32F405

IMU: MPU6000 accelerometer/gyro (SPI)

Baro: BMP280 (I2C)

OSD: INAV OSD w/ AT7456E chip

Blackbox: MicroSD card slot (SD/SDHC)

VCP & 6x UARTs

2x Motors, 7x Servos outputs

2x I2C

3x LEDs for Flight Controller STATUS (Blue, Red) and 3.3V indicator(Red)

Built in inverter for SBUS input (UART2-RX)


SoftSerial on TX2 pad

Battery Voltage Sensor: 1:10 (Scale 1100)

WS2812 Led Strip : Yes

Beeper : Yes


Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

Dimensions: 56 x 36 x 13 mm

Weight: 25g

Flight Controller Firmware:

INAV Flight

Target: MATEKF405SE


Input voltage range: 9~30V (3~6S LiPo) w/TVS protection

2x ESC power pads

Current Senor: 104A, 3.3V ADC, Scale 317

BEC 5V output:

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Continuous current: 2 Amps, Max.3A

BEC 9V /12V output:

Designed for Video Transmitter, Camera, Gimbal ect.

Continuous current: 2 Amps, Max.3A

12V option with Jumper pad

BEC Vx output:

Designed for Servos

Voltage adjustable, 5V Default, 6V or 7.2V via jumper

Continuous current: 5 Amps, Max.6A

Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output:

Designed for Baro / Compass module and Spek trum RX

Linear Regulator

Continuous current: 500mA

Package included:
1 x Matek Systems F405-WING(New) STM32F405 Flight Controller Built-in OSD for RC Drone

Get 10% off your order